Remvoal Tool 1911
Always start with your firearm unloaded and safe. Hold your firearm in a secure position with the barrel facing up and the sights facing away from you.
- Insert the back side of the removal tool (side with the hole milled) into the guide rod/ spring plug hole, (0.399-inch hole)
- Depress the tool about 1/8 inch and rotate compensator about 15 degrees counter clockwise.
- Insert thin side of removal tool depressing the edge of the spring cap about 0.25 inches while rotating compensator to 4 0'clock position. At this point the compensator can be removed.
Caution!!! The spring cap is under tension and may be ejected causing facial/eye injury.
|BARREL||Fits 4.25” Commander length 1911 Autos with a barrel OD between .577"-581". The bushing ID. Is .583" +-.0005". Fits calibers up to and including .45 acp. Can fit .38 and 9mm Minor fitting may be required Not compatible with bull barrels. This compensator is not threaded. Suppresses recoil by venting gasses at muzzle and adding weight to the end of your barrel. Adds approx. 1” length to your barrel and weighs 2.35 oz. CNC Machined Billet Hardened, Aerospace grade stainless steel|